Hi there, can't get XFree running on an ATI-Mach-64 card. I don't know for sure what kind of Mach64 card it is, but it's got 2MB VRAM. When I start XF86_Mach64, I get junk on the screen: most of the pixels are white, but there are thin vertical stripes (a couple of inches high/long) of black. Also some patches of the screen are green or yellow. Nothing changes on screen when I move the mouse or change resolutions.
I suspect that the aperture is the problem; the docs (of XF) say that the aperture has to be set. For this, I seem to need to include a MemBase line in the Device section. But I don't know what to put there: The INSTALL.EXE that comes with the card tells me the aperture is ``4M @ 4000M'' (quoting verbatim) whereas the M64DIAG.EXE tells me the aperture is ``8MB @ 4000MB''. The printed docs say (trying to translate from German) Video memory address * A000 - BFFF plus the address of the memory aperture that has been activated using the installation program What do I have to put in the MemBase line? (The printed docs also claim that I can ``INSTALL APMAP'' which lets me change the aperture but sadly that doesn't work.) Thanks a lot in advance, kai -- Life is hard and then you die.