Bruce Perens wrote:
>
> From: Alberto Brizio <[EMAIL PROTECTED]>
> > Here is the problem, the Sound Card. For the aztcd driver to work, it
> > needs that the IDE port of the Sound Card be initialized, so the best
> > way I've found (many thanks to Prof. Zimmermann) is to use loadlin after
> > booting DOS setting up the Sound Card IDE controller this way.
>
> I've copied this message to Werner Zimmerman, the driver author. What
> sound cards exhibit this problem?
My sound card is a MAD16PRO, it's based on the OPTi 82c929 chip and
has 4 connectors for CD-ROM, a standard IDE, a Panasonic, a Sony and
... damn', I can't remember now.
This SC is sometimes known as a SoundStorm and I suppose it's quite
the same as the Turtle Beach Tropez. The manufacturer is "PRIMAX".
BTW I've not tried to setup the sound module yet: can anybody give me
some hints about it? The Sound-HOWTO says this card is supported but
it is not clear if I've got to pass some options.
I don't want to recompile the kernel.
> I have a Wearnes controller (someone
> at Orchid crossed out the word Wearnes on the printed circuit card and
> packed it in the box with my Orchid 3110) and it does not exhibit this
> problem.
>
> Thanks
>
> Bruce
> --
> Bruce Perens K6BP [EMAIL PROTECTED]
> Finger [EMAIL PROTECTED] for PGP public key.
> PGP fingerprint = 88 6A 15 D0 65 D4 A3 A6 1F 89 6A 76 95 24 87 B3
Hope that helps
Alberto Brizio CSTV - CNR Str. delle Cacce, 91 - Torino
Tel.: +39 11 3919 242
e-mail: [EMAIL PROTECTED]
--
This message was delayed because the list mail delivery agent was down.
