> > > I'm trying to install debian 1.1 from the Infomagic CD set, and using the > boot1440.bin image for the boot disk I can't get it to recognize my 2940 > SCSI adapter. I have a hard disk and a Jaz drive on the SCSI card, and > an IDE/ATAPI CD-ROM. > > I found the directory of patches for the adaptec cards, but don't know > how to use them. I also found the special kernels on the ftp site but > couldn't figure out which one if any would work. Finally, I tried a > variety of 'boot:' parameters with no luck.
Good. Look in ftp://ftp.debian.org/debian/stable/disks-i386/make-floppies and you'll see that it's special kernel number 1 or 9 that you want. > > Can someone point me in the right direction? I realize this is an old > question but I've been working at it for a while with no success. > > Thanks. > > ------------------------------------------------------------------------------- > Robert Platt McGill-Montreal Children's Hospital Research Institute > > "For every complex and difficult problem there is always a simple and easy > solution ... and it's wrong." > -- H.L. Mencken > ------------------------------------------------------------------------------- ----------,___ '---~ __-' ----------" Martin S. -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
