In your email to me, Ricardo Aler Mur, you wrote: > > > > On Thu, 9 Jan 1997, Tim Sailer wrote: > > > Oh... sorry. Well, in /etc/X11/XF86Config, there is a section > > called 'Modules' that is commented out. You have to uncomment > > the start and end lines, and add in the appropriate 'load' lines. > > I'll have to get to a mcahine with X11 loaded, and I'll mail the > > correct lines. And, you have to have loaded the pex and xie modules > > with dselect... > > Would you e-mail these lines to me too, please?
OK... in Section "Files" uncomment the line ModulePath "/usr/X11R6/lib/modules" This precludes the need for an explicit path in the 'Load' commands. Next, uncomment Section "Module" and, a few lines down, the EndSection Add the following lines before the EndSection: Load "pex5.so" Load "xie.so" The whole section should look something vaguely like this: [clip here]------------------------------------------------------------ ModulePath "/usr/X11R6/lib/modules" EndSection # ********************************************************************** # Module section -- this is an optional section which is used to specify # which dynamically loadable modules to load. Dynamically loadable # modules are currently supported only for Linux ELF, FreeBSD 2.x # and NetBSD 1.x. Currently, dynamically loadable modules are used # only for some extended input (XInput) device drivers. # ********************************************************************** # Section "Module" # # This loads the module for the Joystick driver # # Load "xf86Jstk.so" Load "pex5.so" Load "xie.so" # EndSection [clip here]-------------------------------------------------------------- If you need any more help, email me back, and I'll do what I can. Tim -- (work) [EMAIL PROTECTED] / (home) [EMAIL PROTECTED] - http://www.buoy.com/~tps I can't change the direction of the wind, but I can adjust my sails to always reach my destination. -- Jimmy Dean ** Disclaimer: My views/comments/beliefs, as strange as they are, are my own.** -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]