I built a new kernel (2.0.29) and copied it from arch/i386/boot to /boot. I then made a sym link zImage->/boot/zImage.
Next I ran lilo which is were I had a total brain failure. I built the kernel above on my P90 for a 386. I forgot what machine I was on when I ran lilo! I was doing all of this from a xterm on my Sun logged into my P90. Now my P90 is screwed up. Here is how my P90 is setup: /dev/hda1 Ide dos drive 500+M /dev/hdb1 Ide linux drive 130M I use a boot floppy to boot Debian Linux 1.2 on my P90. I made the boot floppy by cp /usr/src/linux/arch/i386/boot/zImage /dev/fd0. I tried using lilo to forget about my linux drive and just boot dos but I think I ended up messing things up. I tried: /etc/lilo.conf: boot=/dev/hda other=/dev/hda1 table=/dev/hda label=dos When I boot the machine I get LILO then unexpected EOF loading dos. Is there any way I can rebuild my MBR so my dos partition works again? Next time I will remember what machine I am on before I do something this stupid again. I hope I can recover from this or else I'm in trouble since my P90 is my machine at work! :( Thanks, Brian -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
