[EMAIL PROTECTED] wrote: > > Hello all... > > I recently acquired a Sound Blaster 16 card for my debian box. I > have seen the card working in a windows machine w/ an ide disk. > > After plugging it in and powering up, the card obviously conflicts > with the adaptec 1542c controller. The machine will not boot. > > Unfortunately, the donor of the card has no configuration > documentation for the SB16 and I need a little help. > > Does anybody out there know of a site that contains information for > the jumpers and configs for this SB16 card? > > thanks in advance...
I messed around with a configuration like this for a while, and finally came up with these settings: AHA-1542: Address 0x334-0x337 IRQ 9 DMA 5 SB16: Address 0x220-0x22f IRQ 5 DMA 1,1 Also with these settings you can put the MPU at 0x300 if you want. Bear in mind you will likely have to build a kernel with SB support. -- Ken Gaugler N6OSK URL: http://www.wco.com/~keng/ "The life of a Repo Man is ALWAYS INTENSE..."