Adding the line you suggested to /etc/modules worked - thank you very much for your help. Scott
On Wed, 21 May 1997 [EMAIL PROTECTED] wrote: > On May 20, Scott wrote > > I am having a hard time getting LINUX to recognize that I have two NIC's > > in my computer. I have two Novell NE2000 cards installed. I have already > > tried the 'append = "ether=0,0,eth1" ' without any luck. On boot-up LINUX > > probes and finds the first card - but not the second. Thanks Scott. > > (A) > > If ne is already compiled in the kernel, the lilo append parameter should > look like this: > > append ="ether=12,0x280,eth0 ether=15,0x240,eth1" > > Of course, adjust for your values. The "0,0, eth1" lable assumes that the > card is detectable and more than likely, you need two of those. If you wish > to try your luck with autodetect, please verify the "0,0,eth1" syntax > which is explained in /usr/doc/HOWTO/mini/Multiple-Ethernet.gz ): > > > (B) > > If ne is loaded as module, then use this alias in /etc/modules : > ne io=0x240,0x280 irq=15,12 > > > Please refrain using both methods at the same time. One method > precludes the other, there should be no need to pass both the append to lilo > and the alias in /etc/modules. I remember having problems detecting > the second card when I tried to notify the kernel in more than one > way at once. > > > > -- > Ioannis Tambouras > [EMAIL PROTECTED], West Palm Beach, Florida > Signed pgp-key on key server. > > > -- > TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to > [EMAIL PROTECTED] . > Trouble? e-mail to [EMAIL PROTECTED] . > > -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
