Terrence Brannon wrote:
>
>
> I am using debian 1.3.1.
>
> I recently upgraded to 128M ram from 32M ram. If I type
> Linux mem=128m
> then the memory is recognized (as indicated by top). However, if I add
> an append line to my /etc/lilo.conf as shown below, my machine boots
> with only 64M available, which is more than 32M, but not accurate.
>
> boot=/dev/hda2
> root=/dev/hda2
> compact
> install=/boot/boot.b
> map=/boot/map
> vga=normal
> delay=20
> image=/vmlinuz
> label=Linux
> append = "mem=128m"
^
I believe that has to be a Capital M
> read-only
Tim
--
(work) [EMAIL PROTECTED] / (home) [EMAIL PROTECTED] - http://www.buoy.com/~tps
"Don't hang on, nothing lasts forever but the earth and sky."
Kansas - Dust in the Wind
** Disclaimer: My views/comments/beliefs, as strange as they are, are my own.**
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
