My system has three UW SCSI HDDs on an Adaptec 2940UW controller. In addition, I have a SyQuest SyJet on /dev/hda, and a 12X CD-ROM on /dev/hdc. When I install LILO to /dev/sda1, it detects the SyJet and tells me that it can't boot off a second HDD. However, the BIOS quite sensibly does boot off the SCSI disk rather than the SyJet, since I have the boot order set to "SCSI, C:, A:". Still, after I install LILO this way and reboot, it just hangs after printing `LI' (IIRC).
But, if I shut down the computer and pull out the IDE cable for the SyJet, then boot (from a rescue disk), install LILO, shut down, reinsert the IDE cable, and boot, LILO works fine. Is there some way to tell LILO that I can indeed boot from /dev/sda even though I have a /dev/hda? My lilo.conf: boot=/dev/sda root=/dev/sda2 install=/boot/boot.b map=/boot/map vga=normal delay=0 image=/vmlinuz append="mem=128M" vga=0x030c label=Linux read-only Thanks in advance, Ben. -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .