On Thu, Feb 05, 1998 at 11:16:10PM -0800, [EMAIL PROTECTED] wrote: > Hi, > > My system is a Debian/Gnu Linux 1.3, Kernel 2.0.29. I can´t install the > CD-Rom drive. It is a Mitsumi Atapi IDE CD-Rom connected to the > Soundblaster 16 card (IRQ 11, address 0x1e8). I´ve used the CD-Rom > installation utility for Soundblaster Pro "sbpcd" with command line > options sbpcd=0x1e8,11. It failed.
I have had a similar setup with CD-ROM/soundcard that you described above. What I had to do was to connect the CD-ROM cable to the secondary IDE connector on my motherboard (right next to the hard drive connecter) and then it worked just fine as /dev/hdc. It did not need the sbpcd driver, just the standard IDE one. Hope this helps. James -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .