Hi, It's no quite so. The xisp realy distroyed the system. I wasn't very carefull and it removed a lot of my base packages because of the dependencies. As the system it was only one week old, I reinstaled everything without many remorses. And for mail I have to use Win95. 8-(
By the way, can I use xisp with xforms 0.81 ? Even that xisp whants xforms>=0.86 ? And will this package magically solve my problemes ? About the dial tone now. The minicom has no problem to get the dial tone. The pppd on the other hand has. Why ? I have try the "," with now use. I still get "NO CARRIER" while minicom has no problem to get it !!! (The micom makes the modem to "beeeeeeeeep" while the scripts don't). Any other idea ? TIA, Ionutz On Saturday, March 21, 1998 3:12 PM, Martin Bialasinski [SMTP:[EMAIL PROTECTED] wrote: > Ionut Borcoman <[EMAIL PROTECTED]> writes: > > > I have made the changes to the files you have mentioned. I still am > > unable to connect. In fact, the modem looks to answer (it respond with > > OK to a coomand like AT&F), but, when I want to call my ISP (using > > ATD2221479\r) I get no dial tone and the process is timed out and > > started from the begining. > > No dial tone means a hardware problem. Check your wires. Also change the > phonenummber to w2221479 . The "w" makes the modem wait some seconds. So > you should hear the relais klick and "catch" the line. You should hear the > dialtone ("beeeeeeeeeeee" in germay). Then the modem should dial the > number and you get this faxlike sounds. > > > PS: I have try xisp and finished with my system distroyed because xisp needs > > > > xforms which are in hamm. 8-( > > You certainly don't have your "system destroyed". This is not > winblows. You still use it, don't you. Only the xisp package didn't fully > install because of a missing package. > > There is xforms 0.81 in bo, but you better use xorms 0.86 . I just > uploaded a deb of it at ftp://134.95.210.54/pub/ > > Ciao, > Martin > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]