On Fri, 17 Apr 1998, Mike Holliday wrote: : Hi, : that is what I did use, but it refuses to accept it as my NiC, and it is the : right card
It would be worth trying the 3Com diskettes and running 3C90XCFG.EXE ... take the card out of PnP mode, try changing IRQs/IO ports ... the number 1 problem I've had with 905s was detection of the interface itself. One card would always autodetect the AUI rather than the RJ-45 port ... you can control that in the config program as well. : : Mike : -----Original Message----- : From: Steve Hsieh <[EMAIL PROTECTED]> : To: Mike Holliday <[EMAIL PROTECTED]> : Cc: debian-user@lists.debian.org <debian-user@lists.debian.org> : Date: Friday, April 17, 1998 10:07 AM : Subject: Re: NiC Cards : : : >What do you mean by a .deb package for a NIC? If you want networking : >support for the 3com card, you should be using the 3c59x module or : >building it into the kernel... : > : > : >On Fri, 17 Apr 1998, Mike Holliday wrote: : > : >> Does anyone know if there is a .DEB package for a 3Com Fast Etherlink : >> 10/100mb bus-master pci adapter? : >> : >> Mike : >> : > : : : -- : To UNSUBSCRIBE, email to [EMAIL PROTECTED] : with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] : -- Nathan Norman MidcoNet - 410 South Phillips Avenue - Sioux Falls, SD 57104 mailto://[EMAIL PROTECTED] http://www.midco.net finger [EMAIL PROTECTED] for PGP Key: (0xA33B86E9) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]