Am 25-Mär-98 schrieb Brederlow: >Patrick Duvaud <[EMAIL PROTECTED]> writes:
>> Please tell me wehre cane i have this CV64/3D driver for Linux Amiga >> >> Patrick Duvaud >> Clarahofweg 23 >> CH-4058 Basel >> Switzerland >> >> >> >> [EMAIL PROTECTED] >Have a look at ftp://ftp.uni-erlangen.de/pub/Linux/680x0/v2.? >There are several kernels, espezially the latest once. Grab the latest >there and compile it with the CV64/3D support aktivated. >After compiling the kernel copy it to the amiga partition and use it >to boot. If it works reboot with "video=virgefb:800x600-8" or similar >mode with your WB set to that mode. You should have Linux running on >the CV64/3D. >May the Source be with you. >Mrvn Hi Mrvn, i hope you can German, i'think Also, Es hat sich was getan mit Deinem Tip. Die CV64/3D hatte einen grauen Screen geoefnet, ohne text Wenn ich einen Kernel normal, mit multiscann oeffne, dann bleibt der Kernel v2.x bei Calibrating delay loop haengen ----:((( ,nicht immer nur teilweise bis oft (nicht alle Kernels) hang it up his dont boot My command line is: Amiboot-5.6 -k vmlinux filesys-ELF-2.0.x root=/dev/ram video=virgefb:800x600-8 My config System is: Amiga1200 Commodore Version - i think its ok no problems ? Micronic ZorroII Board its Work fine only a problem with the PCMCIA Port not Working ?????? Blizzard1230/II 50/50 48 MB Ram HyperCOM3 for Amiga1200 intern 2SER/1AR mit dieser erweiterung funktionieren die v2.x Kernels nicht!!! v1.2 ja Cybervision64/3D 4MB Grafik Board Toccata Sound Card Golem Fast SCSI/IDE Controller wird von Linux erkennt schade! A2091 SCSI Controller Toshiba 5301 CD ROM HP 6020i CD Writer IBM DPES-31081GB Fast SCSI JTS 3.1 GB EIDE PLEACE ich habe schon X Monate, realy hunderte von stunden investiert und es läuft immer noch nicht, schon gar nicht ein min. 256 Farben, bisher einmal v1.2 mit monochrom X-server Screen Configuration geschweige denn mit meiner CV64/3D (z.B 800x600x8) Bitte Pleace HELP ME !!! Tell Me Pleace What i need, where the command line for boot in CV64/3D mode A good Kernel for my Maschine I'm not the Linux expert but i want RUN LINUX with X-Windows on my AMIGA Baby -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]