Check the permissions on /etc/ppp/pap-secrets. I think pppd ignores the file unless the perms are 600. I'd like to gripe here about the woeful state of debugging wrt pppd. More than once I've had to strace the thing to find out what's failing. It could use some better error messages.
Paul Miller wrote: > When I dialup to my Linux box, it keeps reporting authentication failures > even though the password is correct.. Here is the ppp.log file (debug 9) > > Apr 28 15:28:47 serv1 pppd[28141]: pppd 2.3.3 started by LOGIN, uid 0 > Apr 28 15:28:47 serv1 pppd[28141]: speed 9 not supported > Apr 28 15:28:47 serv1 pppd[28141]: Using interface ppp0 > Apr 28 15:28:47 serv1 pppd[28141]: Connect: ppp0 <--> /dev/ttyS1 > Apr 28 15:28:47 serv1 pppd[28141]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> > <auth pap> <magic 0x9aef> <pcomp> <accomp>] > Apr 28 15:28:50 serv1 pppd[28141]: rcvd [LCP ConfReq id=0x3 <asyncmap > 0xa0000> <magic 0xa741f25> <pcomp> <accomp> <callback 0x600>] > Apr 28 15:28:50 serv1 pppd[28141]: sent [LCP ConfRej id=0x3 <callback 0x600>] > Apr 28 15:28:50 serv1 pppd[28141]: rcvd [LCP ConfReq id=0x4 <asyncmap > 0xa0000> <magic 0xa741f25> <pcomp> <accomp>] > Apr 28 15:28:50 serv1 pppd[28141]: sent [LCP ConfAck id=0x4 <asyncmap > 0xa0000> <magic 0xa741f25> <pcomp> <accomp>] > Apr 28 15:28:50 serv1 pppd[28141]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> > <auth pap> <magic 0x9aef> <pcomp> <accomp>] > Apr 28 15:28:50 serv1 pppd[28141]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> > <auth pap> <magic 0x9aef> <pcomp> <accomp>] > Apr 28 15:28:50 serv1 pppd[28141]: sent [LCP EchoReq id=0x0 magic=0x9aef] > Apr 28 15:28:51 serv1 pppd[28141]: rcvd [LCP EchoRep id=0x0 magic=0xa741f25] > Apr 28 15:28:53 serv1 pppd[28141]: rcvd [PAP AuthReq id=0x2 user="paul" > password="mypassword"] > Apr 28 15:28:53 serv1 pppd[28141]: PAP authentication failure for paul > Apr 28 15:28:53 serv1 pppd[28141]: sent [PAP AuthNak id=0x2 "Login incorrect"] > Apr 28 15:28:53 serv1 pppd[28141]: sent [LCP TermReq id=0x2 "Authentication > failed"] > Apr 28 15:28:54 serv1 pppd[28141]: rcvd [LCP TermAck id=0x2] > Apr 28 15:28:54 serv1 pppd[28141]: Connection terminated. > Apr 28 15:28:54 serv1 pppd[28141]: Hangup (SIGHUP) > Apr 28 15:28:54 serv1 pppd[28141]: Exit. > > What are all the possible reasons for this responce? And how can I debug > this problem further? -- Jens B. Jorgensen [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
