>> >> I had trouble setting up an EtherlinkII 3com 3509b card with 2.0.32 and >> 2.0.33 kernel. I configured pnp, compiled the right driver as module, but >> the module gives me either initialization failed or symbol not found when >> specifying io=0x210 irq=3...
Is it the ISA one (I think there is a PCI verison but i'm not sure), anway mine works fine but I had to disable PNP on the card and set the card to use the media I wanted i.e. BNC,UTP(RJ45) or AUI I also had to edit the /etc/modules file and near the top there is a line that says insert you network card driver here, i had to put 3C509 there and then I rebooted and it seemed to work fine. Hope this helps Regards Graham >> Any help is appreciated. >> Marcus >> >> -- >> "Rhubarb is no Egyptian god." Debian GNU/Linux finger brinkmd@ >> Marcus Brinkmann http://www.debian.org master.debian.org >> [EMAIL PROTECTED] for public PGP Key >> http://homepage.ruhr-uni-bochum.de/Marcus.Brinkmann/ PGP Key ID 36E7CD09 >> >> >> -- >> To UNSUBSCRIBE, email to [EMAIL PROTECTED] >> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]