Kernel 2.0.32 (from the kernel-image package) fails to boot hamm system. Reboot occurs after line b:
a hda: ST3491A, 408MB w/120kB Cache, LBA, CHS=899/15/62 b hde: Probing with STATUS instead of ALTSTATUS The system has only one drive and is AFAIK indicated correctly by line a. Booting with kernel 2.0.30 line b looks like this: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 After reading "/usr/doc/kernel-doc-2.0.32/Documentation/ide.txt.gz" I have tried command line parameters at the lilo prompt including the "last resort", linux hda=slow, as well as variations of hda= and ide0= based on the data from the kernel 2.0.30 demsg but the system reboots exactly the same way with any parameters. I don't claim to understand "ide.txt.gz". Anyhow, the data from kernel 2.0.30 demsg may give a clue to the problem: It appears that the"0x1f0-0x1f7" in kernel 2.0.30 demsg "ide0 at 0x1f0-0x1f7,0x3f6 on irq 14" may be ambiguous since the normal address for ide0 is 0x1f0 according to "ide.txt.gz". Everything works with kernel 2.0.30. The machine (cup: AMD 386sx/slx-25) as reported by MSDOS MSD.COM Computer Name: Tandy BIOS Manufacturer: Phoenix BIOS Version: DeskTop VGA BIOS (340-005-11-Rev1.00) Version 80386 ROM BIOS PLUS Version 1.10 BIOS Category: IBM PC/AT BIOS ID Bytes: FC 01 00 BIOS Date: 05/13/92 Processor: 80386 Math Coprocessor: None Keyboard: Enhanced Bus Type: ISA/AT/Classic Bus DMA Controller: Yes Cascaded IRQ2: Yes BIOS Data Segment: None Is there a way to get kernel 2.0.32 to work with this system? -- [EMAIL PROTECTED] Jack Kern Yarmouth, Nova Scotia Debian GNU/Linux 2.0 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]