This means that the code to recognize the card in the kernel is not there. Everything will still work OK as the driver is there and will load. I used to patch pci.h before compiling a kernel to get rid of this for me. With the latest kernel this has been *fixed*.
On Wed, 3 Jun 1998, Gregory Guthrie wrote: > When I boot, I get: > > > pcibios_init : BIOS32 Service Directory structure at 0x000f9a20 > > pcibios_init : BIOS32 Service Directory entry at 0xf04e0 > > pcibios_init : PCI BIOS revision 2.10 entry at 0xf0510 > > Probing PCI hardware. > > Warning : Unknown PCI device (8086:7180). Please read > include/linux/pci.h > > Warning : Unknown PCI device (8086:7181). Please read > include/linux/pci.h > > Warning : Unknown PCI device (1023:9750). Please read > include/linux/pci.h > > Warning : Unknown PCI device (8086:7110). Please read > include/linux/pci.h > > Warning : Unknown PCI device (8086:7111). Please read > include/linux/pci.h > > Warning : Unknown PCI device (8086:7112). Please read > include/linux/pci.h > > Warning : Unknown PCI device (8086:7113). Please read > include/linux/pci.h > > Warning : Unknown PCI device (10b7:9050). Please read > include/linux/pci.h > > > > ALl the details from /proc/pci are below. > > > The device is a 3Com 3c905 Ethernet card, which seems to load OK, > > > 3c59x.c:v0.30-all 12/23/96 [EMAIL PROTECTED] > > 3Com EtherLink III: Overriding PCI latency timer (CFLT) setting of > 32, new value is 255. > > loading device 'eth0'... > > eth0: 3Com 3c905 Boomerang 100baseTx at 0xd000, 00:60:08:68:65:9b, IRQ > 11 > > Internal config register is 16302d8, transceivers 0xe040. > > 8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface. > > > and runs fine! > > eth0: Initial media type MII. > > eth0: vortex_open() InternalConfig 016302d8. > > eth0: vortex_open() irq 11 media status 8802. > > eth0: Media selection timer tick happened, MII. > > eth0: Media MII is has no indication, 8802. > > eth0: Media selection timer finished, MII. > > > It also looks like my AGP graphics board shows up as PCI, and a few other > bridge devices. It is a new PII motherboard (Asus). > > > AM I ok, or do I need to do something. > > > Thanks for any information or pointers. > > > Gregory Guthrie > > [EMAIL PROTECTED] > > -------------------------------------------------------- > > PCI devices found: > > Bus 0, device 11, function 0: > > Ethernet controller: 3Com Unknown device (rev 0). > > Vendor id=10b7. Device id=9050. > > Medium devsel. IRQ 11. Master Capable. Latency=248. Min > Gnt=3.Max Lat=8. > > I/O at 0xd000. > > Bus 0, device 4, function 3: > > Bridge: Intel Unknown device (rev 1). > > Vendor id=8086. Device id=7113. > > Medium devsel. Fast back-to-back capable. > > Bus 0, device 4, function 2: > > USB Controller: Intel Unknown device (rev 1). > > Vendor id=8086. Device id=7112. > > Medium devsel. Fast back-to-back capable. IRQ 10. Master > Capable. Latency=32. > > I/O at 0xd400. > > Bus 0, device 4, function 1: > > IDE interface: Intel Unknown device (rev 1). > > Vendor id=8086. Device id=7111. > > Medium devsel. Fast back-to-back capable. Master Capable. > Latency=32. > > I/O at 0xd800. > > Bus 0, device 4, function 0: > > ISA bridge: Intel Unknown device (rev 1). > > Vendor id=8086. Device id=7110. > > Medium devsel. Fast back-to-back capable. Master Capable. No > bursts. > > Bus 1, device 1, function 0: > > VGA compatible controller: Trident Unknown device (rev 243). > > Vendor id=1023. Device id=9750. > > Medium devsel. Fast back-to-back capable. IRQ 11. Master > Capable. Latency=64. > > Non-prefetchable 32 bit memory at 0xe3000000. > > Non-prefetchable 32 bit memory at 0xe2800000. > > Non-prefetchable 32 bit memory at 0xe2000000. > > Bus 0, device 1, function 0: > > PCI bridge: Intel Unknown device (rev 3). > > Vendor id=8086. Device id=7181. > > Medium devsel. Fast back-to-back capable. Master Capable. > Latency=64. Min Gnt=9. > > Non-prefetchable 32 bit memory at 0x40010100. > > Non-prefetchable 32 bit memory at 0x22a0d0e0. > > Non-prefetchable 32 bit memory at 0xe3d0e200. > > Non-prefetchable 32 bit memory at 0xe3f0e3f0. > > Bus 0, device 0, function 0: > > Host bridge: Intel Unknown device (rev 3). > > Vendor id=8086. Device id=7180. > > Medium devsel. Fast back-to-back capable. Master Capable. > Latency=64. > > Prefetchable 32 bit memory at 0xe4000000. > > > > -------------------------------------------------------- > > Dr. Gregory Guthrie > > [EMAIL PROTECTED] (515)472-1125 Fax: -1103 > > Computer Science Department > > College of Science and Technology > > Maharishi University of Management > > (Maharishi International University 1971-1995) > > -------------------------------------------------------- > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > /*********************** Running Debian Linux *********************** * For God so loved the world that He gave his only begotten Son, * * that whoever believes in Him should not perish... John 3:16 * * W. Paul Mills * Topeka, Kansas, U.S.A. * * [EMAIL PROTECTED] * http://homepage.midusa.net/~wpmills/ * * [EMAIL PROTECTED] * http://www.networksplus.net/wpmills/ * * Bill, I was there several years ago, why would I want to go back? * ********************************************************************/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
