Hello, Thank you for your answers.
The problem I had was that the Mach64 server shipped w/ Debian 1.3.1 didn't know about ATI [EMAIL PROTECTED] After downloawding the XFree86-3.3.2 release binaries, and intalled them everything is running fine (except that I've to adjust modelines: image distorsion). Thanx again, Max > > I am using a Rage Pro card in my Compaq - you need the latest Mach64 server > - it's 3.3.2 or 3.3.4 or something like that (I'm at work and can't check > right now!). The 3.3 server doesn't work with the Rage Pro chip... I used > dselect at ftp.debian.org to update - I was referred to xfree86.org, but > checked there and the new one is out in the distributions according to them. > > I think >I< was the earlier thread you are referring to :-) > > Good luck! > > >>--------------------------------------<< > > > -> Card ATI [EMAIL PROTECTED] (4Mo) > > > > -> Screen: > > + Scanning frequency: H<30KHz-86KHz>/ V<50Hz-120Hz> > > + Resolution: 1280x1024, 1024x768, 1600x1200, 800x600, 640x480 > > + Pix Rate: 130MHz maximum (what is it for ?) > > > > Here's the way I've configured the server. > > -> Installed the XF86_Mach64 server (XFree86 v3.3 Released: > > 1997-01-02) > > as the default X server. > > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]