Hi! I recently bought a sound card which seems to have a OPL3-SAx chip. I managed to compile a kernel for it (2.0.32 with OSS/Free), but now there is no master volume control bar. I have been using an OPTi 82C931 for some time, and with that card it was possible to change the master volume. I know that those card do differ, but both use MSS/WSS as sound driver. Going through the source code (ad1848.c) I noticed that the 82C930 has some strange habits, so I guess 82C931 has some too. I've tried to experiment with the registers for the mixer, but the only results are non-functioning bars. Is there someone out here that has such a card and/or knows something about the chip? I'd be very happy if anyone could provide me with the information I need to adjust these things to get it working.
Now for two other problems/oddities: 1) the sound module complains about "[MSS: IRQ Conflict?]" whenever the module is inserted. My settings are to use IRQ11 and DMA 3 and 0. I've tried is with DMA 3 and 3, but still this message. I used the same settings on the OPTi 931, without this message. 2) Both the OPTi82C931 and this new Yamaha-kinda card seem to be able to produce 3D sound. (I know, 3D with 2 speakers isn't quite possible and I don't intend to use it...) Is there a way to get this working in Linux? Well, that's all for now... Thanx in advance, Maarten Bezemer. -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null