OK, i'm back to trying to get this little beast to ppp into the one on my desk. Both are stock hamm systems.
The catch is that I have to dial into a university modem pool, give an intial choice of where to go, log into it, give another command to make the connection 8 bit clean, specify my own machine as the host, and only then do I get a login prompt. I seem to have gotten as far as getting the two to try to authenticate PAP, but it claims "Login incorrect" Here is the chatscript: ABORT BUSY ABORT "NO CARRIER" ABORT VOICE ABORT "NO DIALTONE" ABORT "NO ANSWER" "" ATZ OK ATDT113,8,2683638 CONNECT '' username> \d\qrhawkins password> \d\qthatpassword keys: \d\q11 continue... \d\q'' keys: \d\q1 host... \d\qeyry.econ ogin: \d\qhawkppp ssword: \qmypasswd $ pppd "" It does successfully log into eyry, and is even notified of mail. But here's what comes from the ppp business: Aug 26 19:33:24 hawkins chat[1733]: Last login: Thu Aug 27 01:30:53 on ttyp1 from xts3c9.tele.iastate.edu.^M Aug 26 19:33:24 hawkins chat[1733]: No mail.^M Aug 26 19:33:24 hawkins chat[1733]: $ Aug 26 19:33:24 hawkins chat[1733]: -- got it Aug 26 19:33:24 hawkins chat[1733]: send (pppd^M) Aug 26 19:33:24 hawkins pppd[1732]: Serial connection established. Aug 26 19:33:25 hawkins pppd[1732]: Using interface ppp0 Aug 26 19:33:25 hawkins pppd[1732]: Connect: ppp0 <--> /dev/ttyS1 Aug 26 19:33:25 hawkins pppd[1732]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xffff13c1> <pcomp> <accomp>] Aug 26 19:33:25 hawkins pppd[1732]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0xffff13c1> <pcomp> <accomp>] Aug 26 19:33:27 hawkins pppd[1732]: rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x76fb> <pcomp> <accomp>] Aug 26 19:33:27 hawkins pppd[1732]: sent [LCP ConfAck id=0x1 <asyncmap 0x0> <auth pap> <magic 0x76fb> <pcomp> <accomp>] Aug 26 19:33:27 hawkins pppd[1732]: sent [LCP EchoReq id=0x0 magic=0xffff13c1] Aug 26 19:33:27 hawkins pppd[1732]: sent [PAP AuthReq id=0x1 user="hawkppp" password="mypasswd"] Aug 26 19:33:27 hawkins pppd[1732]: rcvd [LCP EchoReq id=0x0 magic=0x76fb] Aug 26 19:33:27 hawkins pppd[1732]: sent [LCP EchoRep id=0x0 magic=0xffff13c1] Aug 26 19:33:30 hawkins pppd[1732]: sent [PAP AuthReq id=0x2 user="hawkppp" password="mypasswd"] Aug 26 19:33:30 hawkins pppd[1732]: rcvd [PAP AuthNak id=0x2 "Login incorrect"] Aug 26 19:33:30 hawkins pppd[1732]: Remote message: Login incorrect Aug 26 19:33:30 hawkins pppd[1732]: PAP authentication failed Aug 26 19:33:30 hawkins pppd[1732]: rcvd [LCP TermReq id=0x2 "Authentication failed"] Aug 26 19:33:30 hawkins pppd[1732]: LCP terminated by peer (Authentication failed) Aug 26 19:33:30 hawkins pppd[1732]: sent [LCP TermAck id=0x2] Aug 26 19:33:33 hawkins pppd[1732]: Connection terminated. Aug 26 19:33:34 hawkins pppd[1732]: Exit. The loginid and password are correct; they're the same ones it uses to login. what can possibly be going wrong here? and why is the password nakedly displayed like that in the log? rick