Hi List, I am trying to set up a /dev/3dfx for my Voodoo-1-Card.
I followed the instructions on http://glide.xxedgexx.com/, downloaded Device3Dfx-1.1-2.src.rpm, rpm2cpio'ed it, unpacked the resulting tar file, typed "make" and copied the 3dfx.o file to /lib/modules/2.0.34/misc. Then I edited /etc/conf.modules to include a line alias char-major-107 3dfx and made the 3dfx-device with # mknod /dev/3dfx c 107 0 But after a reboot depmod and modprobe can't probe the 3dfx module. They claim, it's compiled for Kernel 2.0.33: ROOT: # modprobe 3dfx /lib/modules/2.0.34/misc/3dfx.o: kernel-module version mismatch /lib/modules/2.0.34/misc/3dfx.o was compiled for kernel version 2.0.33 while this kernel is version 2.0.34. I tried to recompile the kernel (AMD-K6 is fast) twice, one with, one without CONFIG_MODVERSIONS set, but no success. Any ideas what I am doing wrong here? -- __ __ Frank Barknecht ____ ______ ____ __ trip\ \ / /wire ______ / __// __ /__/ __// // __ \ \/ / __ \\ ___\ / / / ____/ / / / // ____// /\ \\ ___\\____ \ /_/ /_____/ /_/ /_//_____// / \ \\_____\\_____\ /_/ \_\