Hi Matt, did you read my Soundblaster-AWE mini Howto? Please check my homepage below for a copy of it.
On Wed, Dec 02, 1998 at 11:12:02AM -0600, Matt Garman wrote: > > bash-2.01$ cat /dev/sndstat > Sound Driver:3.5.4-960630 (Mon Oct 26 11:42:24 CST 1998 root, > Linux crh3019.urh.uiuc.edu 2.0.35 #1 Mon Oct 26 10:30:03 CST 1998 i686 > unknown) > Kernel: Linux crh3019.urh.uiuc.edu 2.0.35 #1 Mon Oct 26 11:42:44 CST 1998 i686 > Config options: 0 > > Installed drivers: > Type 1: OPL-2/OPL-3 FM > Type 2: Sound Blaster > Type 7: SB MPU-401 > > Card config: > Sound Blaster at 0x220 irq 7 drq 1,5 > (SB MPU-401 irq 1 drq 0) ************ The parentheses means this is inactive. Did you configure your kernel correctly? Especially the midi port, 330 is the default value. If you do "cat /proc/ioports", do you see the following or a similar line? 0330-0331 : Sound Blaster 16 - MPU-401 > -------------------------------- > > The line I highlighted with the "********" is of interest, I think. I > read on a dejanews article that being in parenthesis means the "SB > MPU..." actually wasn't found. The article also suggested that I use > the same irq for my wavetable that I do for my soundcard. But how do > I specify this? Interrupt 1 is definitely wrong. This is how to configure the kernel: CONFIG_SOUND=y CONFIG_SOUND_OSS=y CONFIG_SOUND_SB=y CONFIG_SB_BASE=220 CONFIG_SB_IRQ=5 CONFIG_SB_DMA=1 CONFIG_SB_DMA2=5 ************************** This means the MPU does not need an IRQ, but * CONFIG_SB_MPU_BASE=330 * an ioport, and this is usually 330. * CONFIG_SB_MPU_IRQ=-1 * ************************** CONFIG_SOUND_ADLIB=y CONFIG_SOUND_YM3812=y > My /etc/isapnp.conf file is as follows: (looks fine) > Any help? I hope so ;) Marcus -- "Rhubarb is no Egyptian god." Debian GNU/Linux finger brinkmd@ Marcus Brinkmann http://www.debian.org master.debian.org [EMAIL PROTECTED] for public PGP Key http://homepage.ruhr-uni-bochum.de/Marcus.Brinkmann/ PGP Key ID 36E7CD09