Hi, to X-mas I got me a new ibm-scsi-drive :) therefore I have a Adaptec 2940 AU Controller and, unfortanelety, the drives for this (65 pin) ? are outsold. So I buy a IBM 4,5 GB UW trapezoid connector looks ( ) \-----------/ is smaller, than the Drive - Connectors i usualy have, so i got a "gender-changer" and can connect the drive, ok But as I tried to make a filesystem mkfs -V /dev/sdc/sd5 for example the scsi timed out and the sytem hangs, there where no change to reboot so I hard-reset the box. slow down the datatransfer rate rom 10m to 08m in the scsi-apapter-config for id3 == /dev/sdc and restart, became some messages /dev/sda11 needs check ,,, (/var) /dev/sdb5 needs check ,,,, (/usr) error messages:
Dec 23 22:35:09 pmurmel kernel: EXT2-fs error (device 08:15): ext2_check_blocks_bitmap: Wrong free blocks count for group 222, stored = 6301, counted = 6297 Dec 23 22:35:09 pmurmel kernel: EXT2-fs error (device 08:15): ext2_check_inodes_bitmap: Wrong free inodes count in group 194, stored = 451, counted = 443 Dec 23 22:35:09 pmurmel kernel: EXT2-fs error (device 08:15): ext2_check_inodes_bitmap: Wrong free inodes count in super block, stored = 471542, counted = 471534 Dec 23 22:35:09 pmurmel kernel: EXT2-fs error (device 08:0a): ext2_check_blocks_bitmap: Wrong free blocks count for group 70, stored = 7479, counted = 7471 Dec 23 22:35:09 pmurmel kernel: EXT2-fs error (device 08:0a): ext2_check_blocks_bitmap: Wrong free blocks count for group 91, stored = 7260, counted = 7252 [..] Can I "repair" the filesystem, or will it repair itself during several reboots with fsck or what must I do, ??? Please help, thank You very much Good X-mas Good 1999 -- Peter
