Some words describing the error may help. If it is possible add the messages just before the startup hangs. I think you have change something in your hardware that causes the error because slink boots very well with the 2940 adapter.
Some tips: check the hardware connections, look for IRQ's confilcts, and verify the BIOS settings of your motherboard and the SCSI adapter are correct. If you chnge something in the BIOS before install slink then restore the old settings and try again. -----Mensaje original----- De: Clyde Wilson <[EMAIL PROTECTED]> Para: Gary L. Hennigan <[EMAIL PROTECTED]> CC: debian-user@lists.debian.org <debian-user@lists.debian.org> Fecha: miƩrcoles, 10 de febrero de 1999 1:11 Asunto: Re: Slink boot with SCSI >An Adaptek AHA-2940 > >On 9 Feb 1999, Gary L. Hennigan wrote: > >> Clyde Wilson <[EMAIL PROTECTED]> writes: >> >> | When I try to boot to install Slink I get frozen up just before my >> | SCSI stuff loads. The same disk works fine on my non-SCSI machines. >> | I have tried all the "special" rescue disks and they do the same. >> | >> | Any idea what I am doing wrong? >> >> What type of SCSI adaptor are you using? >> >> Gary >> >> >> -- >> Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null >> >> > > >-- >Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null >