Okay... Got it re-installed and pulled a copy from the /usr/doc/diald
the diald.options which is missing from the /usr/diald and edited it to similar
like yours.
I also set up the connection using ppp-config and tested the ttyS1
which works. Now... I tried from the root using lynx and it failed since it
says it Unable to connect to remote host.
What other sections that need to be set like host.conf, resolv.conf and
others? I currently have the 2 nameservers set in the resolv.conf file.
Kind of weird since I can setup the networking system but not the
dial-up system. :) How did you set up yours to test the system? So I can see
what you did so I can set up this system and make it run. :)
> Try reinstalling diald. If that doesn't fix the missing files, contact the
> maintainer (Philippe Troin <[EMAIL PROTECTED]>). Once you have a complete
> installation, get ppp working (suggest pppconfig) and edit
> /etc/diald/diald.options to look something like this:
>
># /etc/diald/diald.options
>#
># Edit to match your set up.
>#
># This is the port the modem is connected to.
># *** MODIFY to match your set up ***
> device /dev/ttyS2
>
># diald log file: do not change.
> accounting-log /var/log/diald.log
>
># diald monitoring pipe: do not change.
> fifo /var/run/diald.fifo
>
># This turns on full debugging.
> debug 77
>
># We have PPP
> mode ppp
>
># Changed IP JGH.
> local 10.0.0.1
># IP number for the provider's machine. This is different each time we
># connect.
># This is not a problem, but it'll make the routine table look funny.
># Changed IP JGH.
> remote 10.0.0.2
> netmask 255.0.0.0
>
># If the connection gets broken from the ISP, redial only
># if there's outgoing traffic from our side.
> two-way
>
># When the link's up, change routes to point to the real link
># instead of the proxy.
> reroute
>
># diald should set a default route to the proxy SLIP link.
> defaultroute
>
># These two scripts must be executable.
>#ip-up /etc/diald/ip-up
>#ip-down /etc/diald/ip-down
>
># Scripts used to bring up/shut down the serial line.
> connect "chat -v -f /etc/chatscripts/provider"
># disconnect "/etc/ppp/ppp-disconnect"
>
># Do UUCP locking.
> lock
>
># We connect through a modem.
> modem
> crtscts
>
># Local tweaking
> connect-timeout 90
> dial-fail-limit 2
> died-retry-count 0
>
> include /etc/diald/standard.filter
> dynamic
> pppd-options debug noauth user jghasler ipcp-accept-local ipcp-accept-remote
> --
> John Hasler
> [EMAIL PROTECTED] (John Hasler)
> Dancing Horse Hill
> Elmwood, WI
>
>
> --
> Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] <
> /dev/null
----------------------------------
Date: 16-Apr-99 Time:14:23:18
Russell Rademacher
Grapevine2 Technical Support Specialist
System Adminstrator
Toll-Free: 800-267-3070
Phone: 716-214-5644
Fax: 716-214-5642
TDD: 716-214-5643
ICQ: 10663810
AIM: ElikCyber
----------------------------------
