You'll need to pass params to your kernel. If you're booting with lilo you'll need to edit add:
append = "ether=11,0x300,eth0 ether=10,0x240,eth1" If I got the eth0, eth1 right... MR wrote: > OK, I appreciate all the help I received about my original problem. I have > determined that one of the ethernet cards (Asante ISA) does not like > working in linux. So I yanked it out and replaced it. Now I have 2 Intel > EtherExpress 16 cards in the machine. Now, one is at io 0x300, irq 11 and > the other io 0x240, irq 10. Right now the first card (was in the machine > previously) is detected and setup upon bootup. How do I get the eexpress > module to recognize both cards and set the first to eth0 and the second to > eth1? Thanks! > > Matt > [EMAIL PROTECTED] > -- > Any sufficiently advanced form of technology is indistinguishable from magic. > > -- > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null -- Jens B. Jorgensen [EMAIL PROTECTED]