Hello,
I am running slink on a Dell Inpiron 3200 just fine. It looks
like it uses the NM2160 chipset but there does not seem to be
any sign of the NM2200 chipset in my startx output. I dont know
if this means it is unsupported.
Here is a bit of my startx output
XBF_NeoMagic Version 1.1.0 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Operating System: Linux 2.0.34 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 0):
NM2070, NM2090, NM2093, NM2097, NM2160, generic
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) Mouse: type: PS/2, device: /dev/psaux, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "NeoMagic"
(**) SVGA: Monitor ID: "Generic Multisync"
Warning: 'fonts.dir' not found (or not valid) in
"/usr/share/fonts/truetype/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/truetype/").
Warning: 'fonts.dir' not found (or not valid) in
"/usr/share/fonts/truetype/wind
ows".
Entry deleted from font path.
(Run 'mkfontdir' on
"/usr/share/fonts/truetype/windows").
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75
dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts
/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X1
1R6/lib/X11/fonts/100dpi/,unix/:7101"
(--) SVGA: PCI: NeoMagic NM2160 rev 1, Memory @ 0xfd000000,
0xfea00000
(--) SVGA: chipset: NM2160
(--) SVGA: videoram: 2048k
(**) SVGA: Using 16 bpp, Depth 16, Color weight: 565
(--) SVGA: Maximum allowed dot-clock: 90.000 MHz
(**) SVGA: Mode "1024x768": mode clock = 65.000
(**) SVGA: Mode "800x600": mode clock = 40.000
(**) SVGA: Mode "640x480": mode clock = 25.175
(--) SVGA: Virtual resolution set to 1024x768
(--) SVGA: NeoMagic MagicGraph 128XD (NM2160) chip
(--) SVGA: NM2160: Panel is a 1024x768 color TFT display
(--) SVGA: NM2160: Internal LCD only display mode
(--) SVGA: NM2160: Video modes are display in the upper-left
corner
(--) SVGA: NM2160: Low resolution video modes are stretched
(--) SVGA: NM2160: MMIO registers at 0xFEA00000
(--) SVGA: NM2160: Linear framebuffer at 0xFD000000
(--) SVGA: NM2160: Using hardware cursor
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: CPU to screen color expansion (TE imagetext, TE
polytext)
(--) SVGA: XAA: Using 8 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: Horizontal and vertical lines and segments
Nico De Ranter wrote:
>
> Howdy,
>
> is there anybody who has experience with the
> Dell Latitude CPi A366XT portable.
> Is the Neomagic 2200 graphics board supported?
>begin:vcard
n:Stevenson;John
tel;fax:+31 20 34 22 820
tel;work:+31 20 34 22 820
x-mozilla-html:TRUE
url:www.oa.nl
org:OA Europe
version:2.1
email;internet:[EMAIL PROTECTED]
title:Technical Consultant
adr;quoted-printable:;;Objective Alliance=0D=0AHoghilweg 14L;Amsterdam;Zoud Oust;1101 CD;Nederlands
x-mozilla-cpt:;-11328
fn:John Stevenson
end:vcard
