Try to compile and include the following modules in /etc/modules:
parport_probe
parport_pc
parport
paride
lp
Its works for me .
[]'s
Adilson
On 20 May 99, at 1:33, Jaroslaw Berezowski wrote:
>
> Hey.
>
> After switching from 2.0.36 to 2.2.5 I've lost the lp support working.
> Copying into /dev/lp0 causes deadlock of executing process.
> Here are some config infos:
> *******************************************
> #dmesg
> <snip>
> parport0: PC-style at 0x378, irq 7, dma 3 [SPP,PS2]
> lp0: using parport0 (interrupt-driven).
> <snip>
> *******************************************
> When the printer is on during boot, there is one additional line:
> *******************************************
> #dmesg
> <snip>
> parport0: PC-style at 0x378, irq 7, dma 3 [SPP,PS2]
> lp0: using parport0 (interrupt-driven).
> <snip>
> lp0 off-line
> *******************************************
> Here are some /proc files contents:
> *******************************************
> /proc/parport/0/hardware
> base: 0x378
> irq: 7
> dma: 3
> modes: SPP,PS2
>
> /proc/parport/0/devices
> lp
>
> /proc/ioports
> <snip>
> 0378-037a : parport0
> <snip>
> *******************************************
> Note that under 2.0.36 printer is working (as /dev/lp1 of course).
> All settings are coherent with BIOS.
>
> What's going on?
>
> TIA
>
> Jaros
>
>
> --
> Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
>
|---------------------------------------------------------------------|
|Adilson dos Santos Dantas - Rio de Janeiro - Brasil |
|e-mail: [EMAIL PROTECTED] [EMAIL PROTECTED] |
| [EMAIL PROTECTED] [EMAIL PROTECTED] |
|URL: http://www.lci.ufrj.br/~adilsond ICQ UIN# : 4542346 |
| http://www.geocities.com/SiliconValley/7479 |
|---------------------------------------------------------------------|
"It's a summons."
"What's a summons?"
"It means summon's in trouble."
-- Rocky and Bullwinkle
