hi marcus

> I'm trying to install Debian 2.1 on my new computer, but after installing the 
> base system and rebooting, it wont boot any linux. Just before it's about to 
> boot, it says "LI", nothing more... And it stays like that forever.

for reference... see /usr/doc/lilo*

--------

easiest way to (kludge) fix that 

- hope you made a boot floppy during the install...
        - if not...you should always make a boot floppy during install...

not sure if debian has a "rescue disk"...

assuming you can boot linux by some other method...
        ( boot floppies )

1.  go into single user mode
2.  dd if=/boot/vmlinuz-whatever-kernel of=/dev/fd0
3.  reboot from floppy and you should be merrily up and running
...

-- assuming that you made /dev/hda1 your / partition...
        and you want to boot /dev/hda1 instead of /dev/sda1

4.  now edit lilo.conf to be something like:
    root# vi /etc/lilo.conf
        boot=/dev/hda
        map=/boot/map
        install=/boot/boot.b
        prompt
        timeout=50
        image=/boot/vmlinuz-2.2.5-15
                label=linux
                root=/dev/hda1
                read-only
    root# lilo

        - if that does not boot what you want...
        use
                boot=/dev/sda   -- depends what you did during install
                boot=/dev/sda1  -- one of those should work...
                boot=/dev/hda
                boot=/dev/hda1
                ....
                ....
                root=/dev/sda1  ===>> that is your debian / partition ??
        
if you do NOT have your 18GB /dev/hda partitions...you should...


have fun linuxing/liloing
alvin

> I have a Tekram DC-390U2W scsi adapter, a IBM U2W 9GB harddisk and dual 
> PIII-450Mhz cpu's... I also have an IDE disk (18GB IBM) which is /dev/hda, 
> maybe that's causing some problems? In the BIOS i've configured that the 
> machine should boot on the SCSI drive.
> 
> It's a NCR 53C895 scsi chip.
> 
> /Marcus
> 
> 
> 
> 
> -- 
> Unsubscribe?  mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
> 

Reply via email to