what means Q in the last lines ?? I use debian 2.1
(**) XKB: rules: "xfree86" (**) XKB: model: "pc102" (**) XKB: layout: "de" (**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3 (**) Mach64: Graphics device ID: "Primary Card" (**) Mach64: Monitor ID: "Primary Monitor" (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi" (--) Mach64: PCI: Mach64 RagePro rev 92, Aperture @ 0xe6000000, Registers @ 0xe5000000, Block I/O @ 0xe000 (--) Mach64: PCI (92) and CONFIG_CHIP_ID (124) don't agree on ChipRev, using PCI value (--) Mach64: Card type: AGP (--) Mach64: Memory type: 5 (--) Mach64: Clock type: Internal (--) Mach64: Maximum allowed dot-clock: 230.000 MHz (**) Mach64: Mode "1152x864": mode clock = 135.000 (**) Mach64: Mode "1024x768": mode clock = 115.500 (**) Mach64: Mode "800x600": mode clock = 69.650 (--) Mach64: Virtual resolution: 1152x864 (--) Mach64: Video RAM: 8192k (--) Mach64: Using hardware cursor (--) Mach64: Using 16 MB aperture @ 0xe6000000 (--) Mach64: Using 4 KB register aperture @ 0xe5000000 (--) Mach64: Ramdac is Internal (--) Mach64: Ramdac speed: 230 MHz (**) Mach64: Color weight: 565 Mach64: Cannot read colourmap from VGA. Will restore with default (--) Mach64: Pixmap cache: 2 256x256 slots, 8 128x128 slots, 32 64x64 slots (--) Mach64: Font cache: 16 fonts /usr/bin/pland: killed with signal 2 mach64ProgramClkMach64CT: Warning: Q < 10.66666667 mach64ProgramClkMach64CT: Warning: Q < 10.66666667 mach64ProgramClkMach64CT: Warning: Q < 10.66666667 mach64ProgramClkMach64CT: Warning: Q < 10.66666667 -- name: Sebastian Stark email: [EMAIL PROTECTED] ircnick: cran