What about /dev/usb/lp0? j.
-- Jeremy L. Gaddis <[EMAIL PROTECTED]> <http://www.gaddis.org> > -----Original Message----- > From: thanhvunguyen [mailto:[EMAIL PROTECTED]] > Sent: Monday, January 20, 2003 1:51 AM > To: [EMAIL PROTECTED] > Cc: [EMAIL PROTECTED] > Subject: Re: Cupsys & printer > > > > > Check /var/log/messages to see how it is registered. You may have to > > unplug it from the usb port and plug it back in. > > > > Alternative: mount devfs on /dev. devfs will only create device that > > exist on your computer. I expect the printer would appear as > > /dev/printers/0 and /dev/lp0 will be a symlink to printers/0. > > > > -- > > Jerome > > Hello, this is what I get > > Jan 20 01:46:10 Halong kernel: hub.c: new USB device > 00:1f.2-1, assigned > address 5 Jan 20 01:46:10 Halong kernel: printer.c: usblp0: USB > Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x000D > > ... I don't know exactly where , which /dev/ etc it could be in . > > I don't have a /dev/printers* and /dev/lp0 is not a symlink > to anything. > > > -- > > ThanhVu Nguyen > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]