German part see below.
I want to install LINUX on my PC. For this I created a rescue floppy disk (LINUX) under DOS to be able to boot the PC. After I have booted the PC and I answered some questions the step appears to select a harddisk for partitioning. Now the problem occurs. I have connected one HD on IDE1, one HD on IDE2 and one on an SCSI adapter (Adaptec 1542). I want to use the SCSI HD for Linux installation, but the window on the screen only shows /dev/hda and /dev/hdc to be selected ( the IDE HDs). What has to be done to use the SCSI HD for partitioning and installing LINUX? Kind regards Claus Ich moechte gerne LINUX auf meinem PC installieren. Deshalb habe ich mir eine rescue Floppy erzeugt, mit der ich den PC boote. Das funktioniert wunderbar. Danach komme ich -nach mehreren Schritten- zu dem Punkt eine Harddisk auszuwaehlen. Hier beginnt mein Problem. Ich habe je eine HD an IDE1 und IDE2 und eine HD an SCSI ( Adaptec 1542 ) angeschlossen. Zur Auswahl bekomme ich nur /dev/hda und /dev/hdc angeboten ( die IDE HDs ). Die SCSI HD erscheint nicht im Menue. Was muss ich beim Prompt "boot:" angeben oder sonst tun, damit die SCSI HD erkannt wird, sodass dann LINUX von CD auf dieser HD installiert wird. Vielen Dank fuer Ratschlaege. Claus