Suddenly I am not able to get network access through my ethernet card and this error ( PCI BIOS has not enabled ... ) in dmesg seems to point to the problem as it comes just prior to the ethernet card being identified.
--\-- ... PPP line discipline registered. The PCI BIOS has not enabled the device at 0/48! Updating PCI command 0013->0017. tulip.c:v0.91 4/14/99 [EMAIL PROTECTED] eth0: Digital DS21143 Tulip rev 65 at 0xfc00, 00:00)4C:ED:C0:DE, IRQ 10 eth0: EEPROM default media type Autosense. eth0: Index #0 - Media 10BaseT (#0) described by a 21142 Serial PHY (2) block. eth0: Index #1 - Media 10BaseT-FD (#4) described by a 21142 Serial PHY (2) block. eth0: Index #2 - Media 100BaseTx (#3) described by a 21143 SYM PHY (4) block. eth0: Index #3 - Media 100BaseTx-FD (#5) described by a 21142 SYM PHY (4) block. ... --\-- Does anybody know what this might mean ????? I have been playing with bits and pieces so I may have changed something I was not supposed to, ie. the ethernet card was working before. I am using the new tulip driver not the one packed with the Debian - running potato with 2.2.12 on an NEC Versa Note Thanks, J.