> Hmm. Well that didn't work for me. I wish it did...I don't care if I only > get 10 Mb/s. But everytime I tried the 3c59x Vortex driver the system would > crash and I'd have to do a hard reboot. Did you use any special options to > make it work?
Nope, and I didn't compile as a module. Here is the kernel message for detecting them: eth0: 3Com 3c905B Cyclone 100baseTx at 0xb800, 00:50:da:bf:d0:a8, IRQ 10 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 786d. MII transceiver found at address 0, status 786d. Enabling bus-master transmits and whole-frame receives. eth0: Overriding PCI latency timer (CFLT) setting of 0, new value is 32. eth1: 3Com 3c905B Cyclone 100baseTx at 0xb400, 00:50:da:bf:ce:c6, IRQ 11 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 786d. MII transceiver found at address 0, status 786d. Enabling bus-master transmits and whole-frame receives. eth1: Overriding PCI latency timer (CFLT) setting of 0, new value is 32. You see, there might be a difference in the sub-models. HTH Christoph Simon -- ^X^C q quit :q ^C end x exit ZZ ^D ? help .