Ignore the PPP-HOWTO and just use pppconfig to configure ppp. The use pon/poff to start/stop the service. Can you really only get 9600 baud?
On Fri, Sep 01, 2000 at 08:58:39AM +0100, Max Lock wrote: > > Hi folks, > > I'm trying to configure pppd version 2.3.11-1.4 as per release 2.2-r0. > I call pppd using the command `pppd -detach /dev/ttyS1 9600' my config > files look like the following > > /etc/ppp/options: > > 10.1.60.1:10.1.60.2 > asyncmap 00000000 > auth > lock > name 1313 > debug > > /etc/ppp/pap-secrets: > > 1313 * 1313 * > > /etc/ppp/ip-up: > > #!/bin/sh > /sbin/route add -net 10.1.0.0 10.1.60.2 > > > /var/log/messages: > > pppd 2.3.11 started by root, UID 0 > Using interface ppp8 <--- shouldn't this be ppp0 > Connect: ppp8 <--> /dev/ttyS1 > modprobe: Can't locate module ppp8 > ioctl(SIOCSIFMTU): No such device(19) > tcflush failed: Input/output error > Exit. > > Has anyone hit this problem before? my ppp support is compiled into > kernel 2.2.17 as a module. > > -Cheers Max > > -- > Max Lock, System Administrator, TELE2 uk. > > > -- > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null > > -- /bin/sh ~/.signature: Command not found