Hi, I am trying to get a joystick (any joystick) connected to my Woody system and I was hoping to get some helpful hints from you people. I have a SB Awe32 and I am trying to get a Logitech Wingman to work with its gameport. I tried the same with a Sidewinder pad - same result. I compiled support for traditional and Sidewinder sticks as modules. I ran the following file through isapnp:
>-------SNIP-------< # (DEBUG) (READPORT 0x0273) (ISOLATE PRESERVE) (IDENTIFY *) (VERBOSITY 2) (CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING (CONFIGURE CTL00c3/361933426 (LD 0 (INT 0 (IRQ 5 (MODE +E))) (DMA 0 (CHANNEL 1)) (DMA 1 (CHANNEL 5)) (IO 0 (SIZE 16) (BASE 0x0220)) (IO 1 (SIZE 2) (BASE 0x0330)) (IO 2 (SIZE 4) (BASE 0x0388)) (NAME "CTL00c3/361933426[0]{Audio }") (ACT Y))) (CONFIGURE CTL00c3/361933426 (LD 1 # Compatible device id PNPb02f # ANSI string -->Game<-- (IO 0 (SIZE 8) (BASE 0x0200))(ACT Y))) (CONFIGURE CTL00c3/361933426 (LD 2 (IO 0 (SIZE 4) (BASE 0x0620)) (NAME "CTL00c3/361933426[2]{WaveTable }") (ACT Y))) (WAITFORKEY) >-------SNIP-------< This is supposed to activate the game port of the Awe32 at I/O port 0x200. After that, I tried an 'insmod joystick' - no problem. But a 'modprobe joy-analog js_an=0x200,0x003b' gave me the following error message: >-------SNIP-------< /lib/modules/2.2.17/misc/joy-analog.o: init_module: Device or resource busy Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.2.17/misc/joy-analog.o: insmod /lib/modules/2.2.17/misc/joy-analog.o failed /lib/modules/2.2.17/misc/joy-analog.o: insmod joy-analog failed >-------SNIP-------< What do I have to do to get this joystick (or any joystick) working? Any support would be appreciated. Thanks in advance, Juergen