My PCMCIA "3Com Corporation", "3CCFE575BT", "LAN Cardbus Card", "001" manfid: 0x0101, 0x5157 function: 6 (network) PCI id: 0x10b7, 0x5157 is working fine under 2.2.17 and under the 2.4.0-test11 with the "old way" PCMCIA support of compiling all the pcmcia modules, # lsmod Module Size Used by 3c575_cb 20064 2 cb_enabler 2736 2 [3c575_cb] ds 6672 2 [cb_enabler] i82365 23232 2 pcmcia_core 43392 0 [cb_enabler ds i82365]
Thus far I've been unable to get eth0 functional with PCMCIA support specified "the new way" through the kernel .config file, after which support would presuably come from: 3c59x cb_enabler.o pcmcia_core.o yenta_socket.o Its partially a configuation issue as the #eth0 block below does not get loaded into /etc/resolv.conf # eth0 begin domain somewhere nameserver 198.124.130.130 nameserver 198.128.2.10 # eth0 end domain erols.com search erols.com nameserver 207.172.3.8 nameserver 207.172.3.9 Has any worked this out yet? Please respond to [EMAIL PROTECTED] as well as the list. MarvS