hi, I just tried to set up isdn exactly the way Marcus Jodorf described in his mail a few months ago (configure modules, create config files with isdnconfig and edit them).
at bootup I get the following isdn-messages: Dec 16 20:07:53 couchpotato kernel: ISDN subsystem Rev: 1.100/1.84/1.114/1.63/1.17/1.4 loaded Dec 16 20:07:53 couchpotato kernel: HiSax: Linux Driver for passive ISDN cards Dec 16 20:07:53 couchpotato kernel: HiSax: Version 3.3e (module) Dec 16 20:07:53 couchpotato kernel: HiSax: Layer1 Revision 2.37 Dec 16 20:07:53 couchpotato kernel: HiSax: Layer2 Revision 2.20 Dec 16 20:07:53 couchpotato kernel: HiSax: TeiMgr Revision 2.13 Dec 16 20:07:53 couchpotato kernel: HiSax: Layer3 Revision 2.10 Dec 16 20:07:53 couchpotato kernel: HiSax: LinkLayer Revision 2.40 Dec 16 20:07:53 couchpotato kernel: HiSax: Approval certification valid Dec 16 20:07:53 couchpotato kernel: HiSax: Approved with ELSA Quickstep series cards Dec 16 20:07:53 couchpotato kernel: HiSax: Approval registration numbers: Dec 16 20:07:53 couchpotato kernel: HiSax: German D133361J CETECOM ICT Services GmbH Dec 16 20:07:53 couchpotato kernel: HiSax: EU (D133362J) CETECOM ICT Services GmbH Dec 16 20:07:53 couchpotato kernel: HiSax: Approved with Eicon Technology Diva 2.01 PCI cards Dec 16 20:07:53 couchpotato kernel: HiSax: Card 1 Protocol EDSS1 Id=fritzpci (0) Dec 16 20:07:53 couchpotato kernel: HiSax: AVM PCI driver Rev. 1.14 Dec 16 20:07:53 couchpotato kernel: AVM PCI: stat 0x3020a Dec 16 20:07:53 couchpotato kernel: AVM PCI: Class A Rev 2 Dec 16 20:07:53 couchpotato kernel: HiSax: AVM Fritz!PCI config irq:11 base:0xE400 Dec 16 20:07:53 couchpotato kernel: AVM PCI: ISAC version (0): 2086/2186 V1.1 Dec 16 20:07:53 couchpotato kernel: AVM Fritz PnP/PCI: IRQ 11 count 0 Dec 16 20:07:53 couchpotato kernel: AVM Fritz PnP/PCI: IRQ 11 count 3 Dec 16 20:07:53 couchpotato kernel: HiSax: DSS1 Rev. 2.23 Dec 16 20:07:53 couchpotato kernel: HiSax: 2 channels added Dec 16 20:07:53 couchpotato kernel: HiSax: MAX_WAITING_CALLS added Dec 16 20:07:53 couchpotato kernel: Serial driver version 4.27 with no serial options enabled Dec 16 20:07:53 couchpotato kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A Dec 16 20:07:53 couchpotato kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A Dec 16 20:07:54 couchpotato kernel: isdn: Verbose-Level is 2 Dec 16 20:07:55 couchpotato ipppd: info: no CHAP secret entry for this user! Dec 16 20:07:55 couchpotato ipppd[182]: Found 1 device: /dev/ippp0 Dec 16 20:07:55 couchpotato ipppd[187]: ipppd i2.2.10 (isdn4linux version of pppd by MH) started Dec 16 20:07:55 couchpotato ipppd[187]: init_unit: 0 Dec 16 20:07:55 couchpotato ipppd[187]: Connect[0]: /dev/ippp0, fd: 8 Then I tried to dial using $isdnctrl dial ippp0 which does not create a connection and only results in these messages: Dec 16 20:29:10 couchpotato kernel: isdn_net: local hangup ippp0 Dec 16 20:29:10 couchpotato kernel: ippp0: Chargesum is 0 any help is appreciated. thanks, -- Felix Natter