On Sun, 21 Jan 2001, Jonathan Gift wrote: >John Galt wrote: >> > >> >I have in modules: >> >sound >> >uart401 >> >sb io... >> > >> >Missing: >> >mpu... >> >op13... >> >> These mostly deal with midi. mpu is "mpu 401 support (NOT for SB)" which >> is self explanatory why you shouldn't need it, and opl3 is "ymf 2XXX/opl3 >> support". My advice to you on the opl3 is don't get too het up about >> recompiling specifically for it, but make sure you do it the next time >> you build a kernel... >> > >I would imagine it was MIDI or synthesizer. If the mpu is not SB16, then >what is the op13 and where in the sound section is it? What item did I >not turn on? If you hvae a name, because I seem to have mised it twice >now...
There are three questions dealing with the Yamaha opl3. One of them is for a full-on card they built called the opl3-sax. This is not the one you want. The one you want is listed under the old ymf 2000 series number. I can't remeber any more details, but this should be enough to get you what you need, especially if you use X or menuconfig... >Thanks a lot. > >Jonathan > -- When you are having a bad day, and it seems like everybody is trying to tick you off, remember that it takes 42 muscles to produce a frown, but only 4 muscles to work the trigger of a good sniper rifle. Who is John galt? [EMAIL PROTECTED], that's who!