hi thx for the response... i solved the problem in another way... i got me the binaries for xfree86 4.0.2 and installed them over the old stuff... finally it worked :-) kde is up and running...
greets peter Am Freitag, 16. Februar 2001 23:39 schrieben Sie: > I used the i810gtt-0.2-4.src.rpm and xfcom_i810-1.2-3.i386.rpm files > > >from http://www.intel.com. Then I rpm -U i810gtt and alien xfcom_i810. > > Going to /usr/src/redhat/SOURCE I rebuild agpgart.o for my running > kernel, insmod it, and then dpkg -i xfcom's deb I just "alienated". I > maked sure /etc/X11/X pointed to /usr/X11/bin/XFCom_i810 and ran > xf86config to reconfigure my /etc/X11/XF86Config-4. I reviewed the file, > and startx worked at last! > > I don't know if this could work for you, but here it did. I can send you > the files if you like to. > > peter wrote: > > hi there !! > > > > im recently trying to run an xserver on a "fuckin" (sorry) i810 intel > > board... all those on-board stuff sucks... but anyways... > > > > im running potato with a new 2.4.1 kernel ( i also got the new modutils > > and stuff and all works fine )... > > on the xfree site they say to run the server with the i810 chipset i > > would need a "agpgart.o" - module that comes with the server !?! > > i cant find it anywhere... i got one compiled with the kernel and > > modprobe loads it, but still the server wont start... > > > > heres what it said => > > > > XF86Config: /usr/X11R6/lib/X11/XF86Config > > (**) stands for supplied, (--) stands for probed/default values > > (**) XKB: keymap: "xfree86(de)" (overrides other XKB settings) > > (**) Mouse: type: PS/2, device: /dev/psaux, buttons: 3 > > (**) Mouse: 3 button emulation (timeout: 50ms) > > (**) SVGA: Graphics device ID: "i810" > > (**) SVGA: Monitor ID: "My Monitor" > > (--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted. > > (--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted. > > (--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted. > > (--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted. > > (--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted. > > (--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted. > > (--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. > > (--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted. > > (--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted. > > (--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted. > > (--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted. > > (--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted. > > (--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted. > > (--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted. > > (--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. > > (--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted. > > (--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. > > (**) FontPath set to > > "/usr/X11R6/lib/X11/fonts/misc/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/ > >:unscaled,/usr/X11R6/lib/X11/fonts > > /misc/,/usr/X11R6/lib/X11/fonts/100dpi/" > > (--) SVGA: PCI: Intel Unknown chipset (0x7121) rev 3, Memory @ > > 0xd8000000, 0xdc100000 > > (--) SVGA: error doing ioctl(GARTIOCINFO): Invalid argument > > > > Fatal server error: > > Aborting > > > > When reporting a problem related to a server crash, please send > > the full server output, not just the last messages > > > > XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0" > > after 0 requests (0 known processed) with 0 events remaining. > > > > anyone got an idea ?? > > > > thx a lot... > > > > peter > > _________________________________________________________ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com