> Hi
>
> I have loaded Hisax module, but can't dialing my ISP with my S0-PCI ISDN
> card,
> I don't understand this error message:
> Dialing isdn0 is triggered.
As far as I can tell this is not an error message, although I might be wrong.
In case you have a problem with ISDN, the first thing I would do is make sure
that the system logs contain the "right" (= seems alright) messages from the
Hisax module when it is being loaded. Here is what I have:
Script started on Wed Feb 21 01:18:13 2001
[01:18:14 /tmp]$ zgrep -A29 ISDN /var/log/messages.1.gz |head -29
Feb 6 00:32:02 rakefet kernel: ISDN subsystem Rev:
1.100/1.84/1.114/1.63/1.17/1.4 loaded
Feb 6 00:32:03 rakefet kernel: HiSax: Linux Driver for passive ISDN cards
Feb 6 00:32:03 rakefet kernel: HiSax: Version 3.3e (module)
Feb 6 00:32:03 rakefet kernel: HiSax: Layer1 Revision 2.37
Feb 6 00:32:03 rakefet kernel: HiSax: Layer2 Revision 2.20
Feb 6 00:32:03 rakefet kernel: HiSax: TeiMgr Revision 2.13
Feb 6 00:32:03 rakefet kernel: HiSax: Layer3 Revision 2.10
Feb 6 00:32:03 rakefet kernel: HiSax: LinkLayer Revision 2.40
Feb 6 00:32:03 rakefet kernel: HiSax: Approval certification valid
Feb 6 00:32:03 rakefet kernel: HiSax: Approved with ELSA Quickstep series
cards
Feb 6 00:32:03 rakefet kernel: HiSax: Approval registration numbers:
Feb 6 00:32:03 rakefet kernel: HiSax: German D133361J CETECOM ICT Services
GmbH
Feb 6 00:32:03 rakefet kernel: HiSax: EU (D133362J) CETECOM ICT Services GmbH
Feb 6 00:32:03 rakefet kernel: HiSax: Approved with Eicon Technology Diva
2.01 PCI cards
Feb 6 00:32:03 rakefet kernel: HiSax: Warning - no protocol specified
Feb 6 00:32:03 rakefet kernel: HiSax: Note! module load syntax has changed.
Feb 6 00:32:03 rakefet kernel: HiSax: using protocol EURO
Feb 6 00:32:03 rakefet kernel: HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
Feb 6 00:32:03 rakefet kernel: HiSax: AVM PCI driver Rev. 1.14
Feb 6 00:32:03 rakefet kernel: AVM PCI: stat 0x20a
Feb 6 00:32:03 rakefet kernel: AVM PCI: Class A Rev 2
Feb 6 00:32:03 rakefet kernel: HiSax: AVM Fritz!PCI config irq:11 base:0x6100
Feb 6 00:32:03 rakefet kernel: AVM PCI: ISAC version (0): 2086/2186 V1.1
Feb 6 00:32:03 rakefet kernel: AVM Fritz PnP/PCI: IRQ 11 count 0
Feb 6 00:32:03 rakefet kernel: AVM Fritz PnP/PCI: IRQ 11 count 5
Feb 6 00:32:03 rakefet kernel: HiSax: DSS1 Rev. 2.23
Feb 6 00:32:03 rakefet kernel: HiSax: 2 channels added
Feb 6 00:32:03 rakefet kernel: HiSax: MAX_WAITING_CALLS added
Feb 6 00:32:04 rakefet kernel: isdn: Verbose-Level is 2
[01:18:25 /tmp]$ exit
exit
Script done on Wed Feb 21 01:18:27 2001
> Somebody can help me?
>
>
>
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
>
--
Shaul Karl <[EMAIL PROTECTED]>
