> Hi, > > have you run 'anXious'? yes, during installation
> It is a tool with which you set up X. Also take a > look at the XF86Config file. I did and it did not help me, because I did not understand that >There may be an example that explains what > you need to do, but I found it very hard to set this kind of stuff up > myself. > > Greetz, > Sebastiaan > > > On Fri, 2 Mar 2001, Antonio Lobato wrote: > > > > > Hello! > > > > The command startx take me a error message with( the error > > message is on text endl): > > > > > > .......... > > ......... > > You must provide a "Screen" section in XF86Config for at > > least one of the following graphics drivers: vga16, mono > > > > Fatal server error: > > No configured graphics devices > > ........... > > ........... > > > > > > I installed and cinfigured (?) the graphics packages along > > potato instalation, using tasks (no dselect). > > > > Below folow the full error message that seems after type the > > command startx : > > > > > > XFree86 Version 3.3.6 / X Window System > > (protocol Version 11, revision 0, vendor release 6300) > > Release Date: January 8 2000 > > If the server is older than 6-12 months, or if your card is newer > > than the above date, look for a newer version before reporting > > problems. (see http://www.XFree86.Org/FAQ) > > Operating System: Linux 2.2.14-va.4.4-i586 i686 [ELF] > > Configured drivers: > > VGA16: server for 4-bit colour VGA (Patchlevel 0): > > ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, > > ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, > > ET4000W32p_rev_d, ET6000, ET6100, et3000, ncr77c22, ncr77c22e, ati, > > sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597, > > sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx, > > tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, > > tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, > > tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, > > tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, > > cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade, > > oti067, oti077, oti087, oti037c, cl6410, cl6412, cl6420, cl6440, > > generic > > MONO: server for interlaced and banked monochrome graphics adaptors > > (Patchlevel 0): > > hgc1280, sigmalview, apollo9, hercules > > (using VT number 7) > > > > XF86Config: /usr/X11R6/lib/X11/XF86Config > > (**) stands for supplied, (--) stands for probed/default values > > (**) XKB: keymap: "xfree86(en_US)" (overrides other XKB settings) > > (**) Mouse: type: mousesystems, device: /dev/mouse, baudrate: 1200 > > (**) Mouse: buttons: 3 > > (**) FontPath set to > > "/usr/lib/X11/fonts/misc/:unscaled,/usr/lib/X11/fonts/cyrillic/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/Type1/,/usr/lib/X11/fonts/Speedo/,/usr/lib/X11/fonts/misc/,/usr/lib/X11/fonts/cyrillic/,/usr/lib/X11/fonts/75dpi/,/usr/lib/X11/fonts/100dpi/" > > > > You must provide a "Screen" section in XF86Config for at > > least one of the following graphics drivers: vga16, mono > > > > Fatal server error: > > No configured graphics devices > > > > When reporting a problem related to a server crash, please send > > the full server output, not just the last messages > > > > X connection to :0.0 broken (explicit kill or server shutdown). > > > > > > > > -- > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > > >