I saw your device section, try it w/o BusID. > Section "Device" > Identifier "Generic Video Card" > Driver "nvidia" > BusID "PCI:1:0:0" <<<<<remove this line
I don't have this line and it works fine. I don't recognize your monitor, but I use the same video card, if your screen goes black, turn it of and on, I had that ptoblem to. If you monitor is an LCD device, try to adjust the position. At my place I got the screen running, I don't know how to get picture w/o reset the monitor or adjust the position Kind regards, Willem-Jan Meijer > van: Steve Webster <[EMAIL PROTECTED]> > datum: 2003/02/19 wo AM 08:33:33 CET > aan: Debian-User <[EMAIL PROTECTED]> > onderwerp: Nvidia and X > > Hello > > I compiled a new kernel, 2.4.18, for ACPI and nvidia drivers. All went > well, eventually. After updating my XF86Config-4 I tried re-starting > x-windows. All I got was a black screen, no flashes of color, nothing. I > couldn't see any consoles either and had to do a re-boot. > > My XF86Conig is below. The only difference between that and the one I'm > running now is the driver name and the commented-out modules. > > The XFree86.log doesn't look that much different from when I was using > the nv driver. I'll send it if anyone wants to see it. > > Thing is I've had nvidia working before, pre ACPI and pre this > installation of debian 3. (I've installed it a couple of times now, just > to get used to it.) So I'm wondering if it has somethng to do with ACPI. > > Has anyone had a similar experience, or got a clue.... Help gratefully > recieved. > > Steve > > p.s. I have a Dell E770p monitor and a Nvidia TNT2 M64 board. > > >############################################################################################### > #XF86Config-4 > . > . > . > > Section "Files" > # local font server > FontPath "unix/:7100" > # defoma font server > FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" > FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID" > # we can fall back on these if the local/defoma servers have > problems > FontPath "/usr/lib/X11/fonts/misc" > FontPath "/usr/lib/X11/fonts/cyrillic" > FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/Type1" > FontPath "/usr/lib/X11/fonts/Speedo" > FontPath "/usr/lib/X11/fonts/100dpi" > FontPath "/usr/lib/X11/fonts/75dpi" > EndSection > > Section "Module" > Load "extmod" > Load "freetype" > Load "glx" > Load "speedo" > Load "type1" > # Load "GLcore" > # Load "bitmap" > # Load "dbe" > # Load "ddc" > # Load "dri" > # Load "int10" > # Load "pex5" > # Load "record"d" > # Load "vbe" > # Load "xie" > EndSection > > Section "InputDevice" > Identifier "Generic Keyboard" > Driver "keyboard" > Option "CoreKeyboard" > Option "XkbRules" "xfree86" > Option "XkbModel" "pc104" > Option "XkbLayout" "gb" > EndSection > > Section "InputDevice" > Identifier "Configured Mouse" > Driver "mouse" > Option "CorePointer" > Option "Device" "/dev/input/mice" > Option "Protocol" "ImPS/2" > Option "Emulate3Buttons" "true" > Option "ZAxisMapping" "4 5" > EndSection > > Section "Device" > Identifier "Generic Video Card" > Driver "nvidia" > BusID "PCI:1:0:0" > EndSection > > Section "Monitor" > Identifier "Generic Monitor" > HorizSync 31-60 > VertRefresh 50-75 > Option "DPMS" > EndSection > > Section "Screen" > Identifier "Default Screen" > Device "Generic Video Card" > Monitor "Generic Monitor" > DefaultDepth 24 > SubSection "Display" > Depth 1 > Modes "1024x768" "800x600" > EndSubSection > SubSection "Display" > Depth 4 > Modes "1024x768" "800x600" > EndSubSection > SubSection "Display" > Depth 8 > Modes "1024x768" "800x600" > EndSubSection > SubSection "Display" > Depth 15 > Modes "1024x768" "800x600" > EndSubSection > SubSection "Display" > Depth 16 > Modes "1024x768" "800x600" > EndSubSection > SubSection "Display" > Depth 24 > Modes "1024x768" "800x600" > EndSubSection > EndSection > > Section "ServerLayout" > Identifier "Default Layout" > Screen "Default Screen" > InputDevice "Generic Keyboard" > InputDevice "Configured Mouse" > EndSection > > Section "DRI" > Mode 0666 > EndSection > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]