Hi,
I updated my kernel to 2.4.0 - I also updated the ppp-package to 2.4.0.
But I can't connect to my ISP directly, well actually I can b/c I can
ping to a specific IP address and /var/log/syslog tells me that a
connection was established. But I *can't* ping to anything that starts
with www. something ... and so on....
Here is my cuurent setup:
laptop:/home/user1# route
Kernel IP routing table
Destination Gateway Genmask
Flags Metric Ref Use Iface
213.187.64.125 * 255.255.255.255
UH 0 0 0 ppp0
localnet *
255.255.255.0 U 0 0 0 eth0
default 213.187.64.125
0.0.0.0 UG 0 0 0 ppp0
laptop:/home/user1# ping 192.18.97.241 (which I think is www.sun.com)
PING 192.18.97.241 (192.18.97.241): 56 data bytes
64 bytes from 192.18.97.241: icmp_seq=0 ttl=236 time=441.1 ms
64 bytes from 192.18.97.241: icmp_seq=1 ttl=236 time=350.0 ms
64 bytes from 192.18.97.241: icmp_seq=2 ttl=236 time=429.9 ms
-- 192.18.97.241 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 350.0/407.0/441.1 ms
laptop:/home/user1# ping www.sun.com
ping: unknown host www.sun.com
laptop:/home/user1# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:80:C8:8C:1E:F7
inet addr:192.168.5.18 Bcast:192.168.5.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Interrupt:10 Base address:0x300
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:3924 Metric:1
RX packets:297 errors:0 dropped:0 overruns:0 frame:0
TX packets:297 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
ppp0 Link encap:Point-to-Point Protocol
inet addr:213.187.67.148 P-t-P:213.187.64.125
Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:48 errors:0 dropped:0 overruns:0 frame:0
TX packets:49 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:10
my /etc/resolv.conf looks like this:
# eth0 begin
domain <here is my domain address for the network at work>
# eth0 end
nameserver 213.187.64.125
I guess that 213.187.64.125 is the ip address of my ISP - there is a
different one in the /etc/resolv.conf on the server but I get this in
/var/log/syslog:
....
Mar 20 20:13:22 laptop pppd[571]: local IP address 213.187.66.48
Mar 20 20:13:22 laptop pppd[571]: remote IP address 213.187.64.124
Mar 20 20:13:22 laptop pppd[571]: Script /etc/ppp/ip-up started (pid
575)
Mar 20 20:13:23 laptop pppd[571]: Script /etc/ppp/ip-up finished (pid
575), status = 0x100
....
Can anybody figure out what I'm doing wrong here?
Thanks a lot fot your help.
Philipp
