-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all.
On Friday 21 Feb 2003 2:45 am, Alvin Oga wrote: > hi ya cirrus > i'd bet that you need to have your cdrw on one ide cable and your > system disk on a different cable .. The cdrw is on a different ide cable from my system drive. > > and you would need to set your cdrw to udma2 ( ata-33 ) > hdparm -d 1 -X 66 -m 16 -c 1 /dev/hdc Nope that didn't do the trick > > also be sure that your kernel supports the ide chipsset on the mb > # lspci 00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) 00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) $ cat .config|grep VIA CONFIG_BLK_DEV_VIA82CXXX=y . . That is the only VIA related option > and you might want to try using an ata-66 ( 80-conductor ) cable to see > if it helps any I think the cable is an ata-66 cable. > c ya > alvin Cheers On Friday 21 Feb 2003 2:20 am, Hall Stevenson wrote: > What kind of power does the machine have ?? It's gonna take a fair > amount of power to burn at that speed and do anything else > comfortably... I've seen some 32x + burners "recommend" a PII-500 or > higher. $ cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 6 model name : AMD Athlon(tm) XP 1600+ stepping : 2 cpu MHz : 1400.001 . . $ cat /proc/meminfo total: used: free: shared: buffers: cached: Mem: 327655424 297631744 30023680 0 10526720 134602752 Swap: 740265984 55382016 684883968 MemTotal: 319976 kB . . Cirrus -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iEYEARECAAYFAj5VpeIACgkQueyZ7njCUy+8vgCgjfbbUU4tC7MQ6kEsmwNQYEmC Hs4AnRfoHxn8HujFmC8vEVCrWInuKmlK =1omZ -----END PGP SIGNATURE----- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]