Subject: Stylus Color & magicfilter Date: Fri, May 04, 2001 at 12:09:44PM -0300
In reply to:Marcelo Chiapparini Quoting Marcelo Chiapparini([EMAIL PROTECTED]): > Dears debianners, > > I have just installed magicfilter in my potato 2.2r3 box. I have attached a > Epson Stylus Color 800 printer. I have configured magicfilter but when I try > to print anythig I get the message: > > lpr: cannot create /var/spool/lpd/epsonsc800/.seq I set up an Epson SC 400 printer a while back. I still have dir's in /var/spool/lp for them drwxr-sr-x 2 lp lp 1024 Nov 9 11:10 epson drwxr-sr-x 2 lp lp 1024 Nov 9 14:06 epson100 drwxr-sr-x 2 lp lp 1024 Nov 3 2000 epson180 drwxr-sr-x 2 lp lp 1024 Nov 3 2000 epson360 drwxr-sr-x 2 lp lp 1024 Nov 3 2000 epson720 I seem to recall that I made them, not magicfilter. The multi dir's were necessary as I had to modify the magicfilter filters to get the 400 to work at different resolutions. > > what I am doing wrong? Just in case here follows my printcap file: > > # > # This file was generated by /usr/sbin/magicfilterconfig. > # > lp|epsonsc800|Epson Stylus Color 800:\ > :lp=/dev/lp1:sd=/var/spool/lpd/epsonsc800:\ > :sh:pw#80:pl#72:px#1440:mx#0:\ > :if=/etc/magicfilter/[EMAIL PROTECTED]:\ > :af=/var/log/lp-acct:lf=/var/log/lp-errs: > > > The /var/spool/lpd/epsonsc800 directory doesn't exist. The /var/log/lp-errs > file is empty. Try making that directory. HTH=Hope This Helps, YMMV=Your Mileage May Vary, HAND=Have A Nice Day -- One picture is worth 128K words. _______________________________________________________