Got it, route add -net 203.190.77.144 netmask 255.255.255.240 gw 203.190.77.158 dev eth2
It is not anymore failing, but is it possible for ex. I have a LAN thats on 10.0.0.0/24 I want them when they access 203.190.77 block it will pass on my other gw is this possible? -- thanks, louie miranda ----- Original Message ----- From: "Russell Shaw" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Tuesday, February 25, 2003 1:51 AM Subject: Re: conflict when adding eth2 (diff, gateway) > louie miranda wrote: > > Actual interface.. > > --- > > eth0/inet addr:203.190.72.108 Bcast:203.190.72.111 Mask:255.255.255.248 > > eth1/inet addr:10.0.0.1 Bcast:10.255.255.255 Mask:255.255.0.0 > > > > > >>eth2/inet addr:203.190.77.156 Mask:255.255.255.240, Not yet added. > > > > This *might* work: > > Kernel IP routing table > --- > Destination Gateway Genmask Iface > 203.190.72.104 0.0.0.0 255.255.255.248 eth0 > 10.0.0.0 0.0.0.0 255.255.0.0 eth1 > 0.0.0.0 203.190.72.110 0.0.0.0 eth0 > 203.190.77.144 203.190.77.156 255.255.255.240 eth2 > > > I have 3NICS, eth0 (primary gateway) and eth1 (lan network) and eth2 > > (diffrent network and gateway..) > > > > When i add the eth2 using this command > > > > /sbin/ifconfig eth2 203.190.77.156 netmask 255.255.255.240 up > > > > Connections going to 203.190.77 block all hangs, i dont know why. > > Im trying to add the route gateway to 203.190.77.158 (gateway) for > > 203.190.77 block, but it does not work. Error says, Invalid eth* > > But i can see eth2. > > > > Any ideas? > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]