|
Okay lets try this again, this time with just a
little more information. =)
Here's the problem I am having. This occurs
on all the flavors of the latest stable release root disks. Basically when
the root disk loads up into the install menus, specifically the first release
notes window and the driver setup window, if I scroll down with the keyboard the
system will show a black line in the middle of the window and then *hang* the
system up to dry. I booted off floppies, I booted off a FAT32 disk with
loadlin, and even ran memtest82 to see if I had memory probs. I bumped my
clock back down to spec(celeron 300a) none of which seems to be working. I
have installed debian in the past so I am assuming its an issue with the latest
release.
Now for the system specs;
ABIT BM6
Celeron 300a OC'ed to 450MHz
128Megs PC100 SDRAM
UDMA66 IDE Controller Card
ATI AGP Rage Fury 32Meg
ATI All in Wonder TV PCI
2 CDRoms
1 HP Travan Tape Drive
SB AWE64 PCI
And now for dmesg;
Linux version 2.2.19pre17-ide ([EMAIL PROTECTED]) (gcc version
2.7.2.3) #1 Tue Mar 13 23:36:29 EST 2001
BIOS-provided physical RAM
map:
BIOS-e820: 0009e000 @
00000000 (usable)
BIOS-e820:
07f00000 @ 00100000 (usable)
Detected 463921 kHz processor.
Console:
colour VGA+ 80x25
Calibrating delay loop... 924.05 BogoMIPS
Memory:
126576k/131072k available (1036k kernel code, 416k reserved, 1532k data, 72k
init)
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash
table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768
(order 5, 128k)
VFS: Diskquotas version dquot_6.4.0 initialized
Intel
machine check architecture supported.
Intel machine check reporting enabled
on CPU#0.
128K L2 cache (4 way)
CPU: L2 Cache: 128K
CPU: Intel Celeron
(Mendocino) stepping 05
Checking 386/387 coupling... OK, FPU using exception
16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad
bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819)
Richard Gooch ([EMAIL PROTECTED])
PCI: PCI BIOS revision 2.10 entry at
0xfb330
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux
NET4.0 for Linux 2.2
Based upon Swansea University Computer Society
NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP,
IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)
Starting
kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no
serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at
0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time
Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
loop:
registered device at major 7
Uniform Multi-Platform E-IDE driver Revision:
6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset
revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at
0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at
0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
PDC20262: IDE controller on
PCI bus 00 dev 48
PDC20262: chipset revision 1
PDC20262: not 100% native
mode: will probe irqs later
PDC20262: (U)DMA Burst Bit ENABLED Primary PCI
Mode Secondary PCI Mode.
ide2: BM-DMA at 0xe400-0xe407, BIOS settings: hde:DMA, hdf:DMA
ide3: BM-DMA at
0xe408-0xe40f, BIOS settings: hdg:DMA, hdh:pio
hda: FUJITSU M1638TAU, ATA
DISK drive
hdb: HP COLORADO 8GB, ATAPI TAPE drive
hdc: ATAPI 48X CDROM,
ATAPI CDROM drive
hdd: OTI-975 SOCRATES ATAPI CD-R/RW, ATAPI CDROM
drive
hde: WDC WD307AA, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq
14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xd400-0xd407,0xd802 on irq
9
hda: FUJITSU M1638TAU, 2452MB w/128kB Cache, CHS=622/128/63
hde: WDC
WD307AA, 29333MB w/2048kB Cache, CHS=59598/16/63, UDMA(66)
hdc: ATAPI 48X
CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.11
hdd: ATAPI
6X CD-ROM CD-R/RW drive, 1024kB Cache
Floppy drive(s): fd0 is 1.44M
FDC 0
is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
Partition
check:
hda: hda1 hda2
hde: [PTBL] [3739/255/63]
hde1
RAMDISK: Compressed image found at block 0
apm: BIOS version 1.2
Flags 0x07 (Driver version 1.13)
apm: disabled on user request.
VFS:
Mounted root (ext2 filesystem).
Freeing unused kernel memory: 72k
freed
kmod: runaway modprobe loop assumed and stopped
kmod: runaway
modprobe loop assumed and stopped
NET4: Unix domain sockets 1.0 for Linux
NET4.0.
|
