Andy Laurence wrote: > > > > OK, I've managed to get the default drivers installed > > (driver-1.bin), but > > > there is no 82559 driver > > > > > No. It is the eepro100 driver, as Slaven Peles mentioned. > > I've tried that one ... > > ---------- > > /lib/modules/2.2.19pre17-idepci/net/eepro.o: init_module: Device or resource > busy > Hint: this error can be caused by incorrect module parameters, including > invalid IO or IRQ parameters > /lib/.../eepro.o: insmod /lib/.../eepro.o failed > /lib/.../eepro.o: insmod eepro failed > > Installation failed > Nope, not eepro, eepro100.
Write back when you've tried to load that one. Sometimes, you need to load the pci-scan module first. I've got one here built for 2.2.15; I guess it will work on 2.2.19: ftp://ftp.mindspring.com/users/keithmur/pci-scan.o For further reference, see: http://www.scyld.com/network/eepro100.html (I had a Linksys card (tulip driver) that wouldn't work without pci-scan under 2.2.15. I happened to build the tulip driver into my 2.2.19 kernel, and it didn't need pci-scan after that. Whether this is because the tulip driver was updated under 2.2.19, because I'm not using tulip as a separate module anymore, or some other reason, I don't know).
