[EMAIL PROTECTED] (dman) writes:
> On Sat, Oct 13, 2001 at 04:42:18PM -0400, Rong Fan wrote:
> | Hello,
> | my ethernet card(D-Link DFE-530TX+) wasn't recognized during installation.
> what should i
> | do to make it work? any advice is welcome.
>
> Run 'modconf' and pick the tulip driver. Then see 'man interfaces'
> for information on editing /etc/network/interfaces to set up the
> logical part of the network connection. For example :
>
> Static IP, load at boot time :
>
> auto eth0
> iface eth0 inet static
> address 192.168.0.6
> netmask 255.255.255.0
> gateway 192.168.0.1
>
>
> Dynamic IP, load at boot time :
>
> auto eth0
> iface eth0 inet dhcp
NO NO See that + on the end -- takes the rtl8139 driver.
--
* For God so loved the world that He gave his only begotten Son, *
* that whoever believes in Him should not perish... John 3:16 *